Here are some pictures to relocate the radio box switch.
This is the way it should have been from the start.
The Bash Buster's work best if you relocate your radio box switch
to the top of the Rx box next to the charge jack.
Other wise you'll have to pull the panel away from the Velcro mount
on the lower frame each time to turn your Baja on or off.
Just make sure you position your switch so it is ON in the forward position. If you use the stock switch you will need to grind, dremel or file the bottom of the switch so it doesn't hit the battery.
There is a hollow space in the stock switch that you can grind away to give you the clearance.
Or you can use an optional smaller switch or the switch that comes with your upgraded radio should you decide to buy one. In my opinion HPI could have and should have put the switch there in the first place!